Mold Bomb Foggers - Do they work and how to use them safely (2023)

Do you have mold in your home and need a way to get rid of it?

Want to be sure you're killing mold and looking for a product that can do just that?

A mold pump fogger might be just what you need!

They are designed to cover hard-to-reach places and kill mold spores and prevent them from spreading.

Mold Bomb Foggers - Do they work and how to use them safely (1)

Mold pump foggers come in an aerosol can as a spray or as a solution that can be added to a fog machine that you can use to kill mold.

They are also quite good at removing moldy odor from your home.

After release, the substance creates a mist and spreads over a wide area.

After spraying, the substance becomes airborne and coats the mold. There are different types that have been developed for different areas depending on the needs.

For example, you can buy a handheld that you can pick up and take with you to use in different areas, or one that you can put down, open, and then put down.

Whatever you choose, follow the directions and pay close attention to whether it says it will cover up and trap mold or kill it.

Different produce different results, be sure to read on to learn how to use one and get a mold pump mist that works best for your needs.

How effective are mold bomb foggers?

Mold bomb foggers work the way they're meant to: kill mold or cover it up.

Many are effective with a single application.

Once airborne, the substance attaches to, kills, and/or coats bacteria, toxins, and mold spores.

When there is mold in multiple rooms, you need more than one smoke machine.

While a mold bomb fogger can be used in any area of ​​a home, they are extremely effective for crawl spaces, bathrooms, attics, and basements.

However, they do not eliminate the source of the problem or eliminate actively growing mold.

To completely prevent and eliminate mold, you must remove any water or moisture, dry the area, and take steps to ensure it does not reappear.

It is important to first treat the source by cleaning the area before using a mold bomb. This will help prevent future mold growth and ensure that the fog machine does its job when you use it.

They are part of the process, but not the whole process.

In addition to killing mold, it also kills other airborne bacteria, helping to keep your home clean and free of harmful substances you can't see or smell.

The Best Places and Situations to Use a Mold Bomb Smoker

Most of the mold cannot be seen. It is microscopic, on walls and other places too difficult for a person to reach.

This is where a mold pump fogger comes into play. With it, you can reach these inaccessible areas.

If you see mold in certain places, there is more nearby for the fogger to destroy.

For these reasons and more, they are very useful in the following places:

basements/crawl spaces

Mold is more likely to grow in dark places, making basements and basements more prone. In the environment and humidity, these areas can be havens for mold.

You can use a mold bomb mist to cover your entire basement or if there is mold in your crawl space.

They are effective at covering large areas, so this is a good option.

Another reason to use one is that you can get into areas that are hard to reach.

You can cover corners and anywhere in the basement or crawl space that would otherwise be inaccessible.

Plus, you can use it as a preventative measure and not have to wait for mold.

The harsh chemicals in the fogger will help clean, dry, and disinfect the area and prevent mold growth.


In addition to being another dark place, there are many nooks, crannies, and bars that make it difficult for anyone to access.

This is where a mold pump fogger can really help by destroying mold in these areas.

Because many attics are poorly insulated, mold can easily form.

Using the fogger can be beneficial as the substance emitted by the spray can cover the entire attic and get into cracks or small openings where mold might be present.

AC channels

Since it is difficult for someone to access and clean an AC duct, mold pump foggers are a good option for AC ductwork.

The spray easily goes down the drain and kills any mold.

Although you may not realize it, these ducts are a common place for mold due to condensation building up when the air conditioner is running.

Instead of struggling to physically clean and remove the mold in your ducts, you can spray the fogger and get rid of it that way.

This makes the process much simpler, easier, less stressful, and less physically demanding.


Using a mold pump fogger in a bathroom can be very effective.

You can quickly cover the entire area and get into hard-to-reach places like the ceiling and behind the toilet.

Remember, if there's mold on your shower walls or floor, there's more you can't see.

Given the growth of mold in the bathrooms due to the constant use of water, a smoke machine is ideal for this place.

Are mold bomb foggers safe?

For the most part they are safe.

It is extremely important to follow the directions and use as directed.

Fog machines contain strong chemicals intended to kill mold, and if precautions are not followed, the risk increases.

To protect yourself, wear gloves, goggles, and a mask when using it.

Different offer different protections and ingredients, so read the label carefully.

You can check if the house you want is suitable for pets and children and if it is safe to get objects from the house such as furniture or toys.

You can also find one that is non-toxic or EPA registered.

Dangers of Mold Bomb Foggers

There are several risks to consider when using a smoke machine.

Remember that it releases strong chemicals and you can be exposed to them.

This can be harmful as you do not want to inhale the substance or have it come into contact with your body.

Here are some precautions:

  • Notify others, make sure no one is near or entering the area where the fog is being used
  • Do not spray near a heat source or power button. This can cause an explosion.
  • Don't stay home after spraying
  • Using more than one fogger per room is dangerous and can cause unnecessary exposure to you and harm you and your home.
  • Avoid using foggers in small, enclosed spaces such as closets or closets. This can cause an explosion.

mold infestation?

Financial support844-994-1288to get a risk-free quote from a certified mold remediation specialist near you.

We can help eliminate mold and keep it from coming back.

CALL NOW: 844-994-1288

How to use a mold pump fogger

The most important thing you can do is follow the instructions for the exact product you purchased.

This ensures that you follow safety precautions and trigger without detrimental consequences.

However, there are general guidelines and this section will help you with whichever you choose.

1. Remove items that shouldn't be affected

Clear the room of anything you don't want covered in the mist: furniture, toys, papers, electronics.

The substance will dampen the area, so it's best to take the extra time and caution to clear the room of these items so they don't get damaged.

2. Put on your protective gear

The mask, goggles, gloves, and protective clothing are important to help reduce the risk of injury and exposure to the substance released by the nebulizer.

Chemicals are strong and you want to protect yourself when using them.

3. Prepare the nebulizer

Fill the fog machine with the chemical solution.

Some can be poured on without adding anything else, while others require a small amount mixed with water, so check the nebulizer carefully and follow the instructions.

It is recommended to do this step outdoors or over the bathroom sink to avoid spilling it where it shouldn't.

The next step is to adjust the mist settings.How do you know what to start with?

You can check the instructions or experiment outside to see how strong the substance comes out.

It may be best to set it low as it reduces risk and damage to your home.

If you are using the fog machine in the basement near your water heater, it may be a good idea to turn it off.

Also, cover smoke alarms, as the substance could set them off.

If you use a stationary fog machine, you can set it to the desired time, which does not have to be too long: 5-7 minutes.

Place the fog machine in the best place so that it can cover as much space as possible.

In general, one nebulizer per room is sufficient.

The EPA reports that a 6-ounce fogger can cover a 25-foot x 25-foot space.

4. Start spraying

At this point you can turn it on. With a stationary fogger, stand back after turning it on and make sure no one enters the area while it is in use.

If you're using one that holds and sprays, start spraying the entire area when you're ready.

Make sure you have vents, walls, ceilings, and floors.

There are other types that come in a can.

With these, the process is straightforward: place the can in the middle of the room, open it, and press the button until the goo comes out (there should be more detail on the can, so read all the instructions carefully).

You can then follow the same process: go outside and make sure no one comes in.

When you're done, stay out of the area for 2-4 hours to allow the mist to dry and to protect yourself. If there are windows, open them to ventilate the room.

How to choose the right nebulizer

This may depend on the size of the area you need to cover.

Less powerful portable units are better suited for smaller areas and shorter distances, while higher powered stationary units cover larger spaces like a basement or full basement.

This also prevents you from walking in a large area when using a handheld.

The larger ones can reach farther areas, allowing them to cover more distance.

Whichever you are interested in, will tell you how big the area is, how much solution it can hold, and where it fits best. Follow this information to choose the best one for your needs.

Mold pump foggers are available at hardware stores, department stores, and many places online.

Here is a list of some places that sell molds:

  • amazonas
  • walmart
  • The house store
  • low

How much does it cost to tarnish a house for mold?

If you choose to hire a professional to do this job, the cost can vary depending on the size of the home, the area to be covered, and the type of chemical used.

A smaller area can cost hundreds of dollars, but when needed for an entire house, it can cost thousands of dollars.

To be more specific, many companies charge by the square foot.

For a small area, the total price can range from $300-$600 for an entire house, but the price can go as high as $2,000-$5,000 depending on the size of your house and what else needs to be done besides tarnishing.

When to call a professional

If the mold is all over the house, it will be extremely difficult to remove it yourself.

This is if you want to use a professional. They are licensed, experienced, and can advise you on the best course of action.

They are also familiar with the use of a mold fogger pump and, unlike you, have used it many times.

While it may cost more, hiring a professional may be the best course of action if you have a lot of mold in different areas to ensure it is removed properly and safely.

We have mold remediation technicians who can help you get rid of mold in your home and prevent it from coming back.

For disasters of all magnitudes, aAvailable in 95% of the US

24-hour emergency service: 844-994-1288

Top Articles
Latest Posts
Article information

Author: Jeremiah Abshire

Last Updated: 11/11/2022

Views: 5996

Rating: 4.3 / 5 (74 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Jeremiah Abshire

Birthday: 1993-09-14

Address: Apt. 425 92748 Jannie Centers, Port Nikitaville, VT 82110

Phone: +8096210939894

Job: Lead Healthcare Manager

Hobby: Watching movies, Watching movies, Knapping, LARPing, Coffee roasting, Lacemaking, Gaming

Introduction: My name is Jeremiah Abshire, I am a outstanding, kind, clever, hilarious, curious, hilarious, outstanding person who loves writing and wants to share my knowledge and understanding with you.